- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
three phase 5 hp
weichai
1. Preparations before starting
(1) Operators in the equipment room should observe the safety operation rules, wear work clothes and insulation shoes, and have clear division of labor.
(2) Check whether the flywheel and the generator part of the railing cover is intact.
(3) Check the gearbox, clutch, governor, oil level, each fastener, etc., confirm that the condition, oil and water temperature is not lower than 20 degrees, before starting.
(4) Set the pipeline gates of each system at the "working" position.
(5) Check the link bolts of the transmission mechanism and tighten them.
(6) the clutch handle pressure is normal, whether the overspeed safety device is located.
(7) Check whether the pressure of the gas cylinder is normal and whether the overspeed safety device is located.
(8) Open the blowdown valve of the air pump.
(9) Check whether the circulating water pump, oil pump and fuel pump are normal.
(10) Place the field resistance at the maximum resistance position, and turn off the transmission switch.
1. Preparations before starting
(1) Operators in the equipment room should observe the safety operation rules, wear work clothes and insulation shoes, and have clear division of labor.
(2) Check whether the flywheel and the generator part of the railing cover is intact.
(3) Check the gearbox, clutch, governor, oil level, each fastener, etc., confirm that the condition, oil and water temperature is not lower than 20 degrees, before starting.
(4) Set the pipeline gates of each system at the "working" position.
(5) Check the link bolts of the transmission mechanism and tighten them.
(6) the clutch handle pressure is normal, whether the overspeed safety device is located.
(7) Check whether the pressure of the gas cylinder is normal and whether the overspeed safety device is located.
(8) Open the blowdown valve of the air pump.
(9) Check whether the circulating water pump, oil pump and fuel pump are normal.
(10) Place the field resistance at the maximum resistance position, and turn off the transmission switch.
