Fuel Dispenser Pumping Gear Petro Pump

Structure: Gear Pump
Usage: Petrol, kerosene, diesel oil
Power: Electric
Standard or Nonstandard: Standard
Pressure: Low Pressure
Application: Dispensing pump
Flow rate: 5~50L/min
Sample: Available

Quantity:
Availability:





Inquire Add to Basket

Model:
gear pump
Brand:
HAOSHENG

Product Description

Products Description

Features
l. Reasonable design and compact structure; body case is made of aluminum alloy sprayed with flash sliver lacquer, portable and beautiful.
2. Durable pump body of HT2003. Vane is made of hard graphite with advantages of self lubricated, good wear resistance and long using life.
4. Sealing materials is made of Chemigum and fluoroelastomer with advantages of oil resistance, cold resistance and reliable seal.
5. Excellent processing and low noise.
6. Oil-gas forced separation and strong capacity of oil-gas eparation.
7. High vacuum degree and suction lift.
8. Reasonable design of structure and large theoretic displacement.
9. Models A and C inlet: 1 1/2' ' . outlet: 3/4' ' ; Models B and D inlet: 2", outlet l' ' ; and many models for your option.
IO. Models A and B are directly flanged with flow meter while Models C and D are connected with flow meter via S pipe. It is of wide applicability.

Fuel dispenser pump

Zcb-90 combined gear pump is composed of gear pump and oil and gas separator. Its main
function is to supply oil and to separate gas. It is the power source of hydraulic system.

Details Images

Product Paramenters

Technical parameters of pump
Item	Small flow	Large flow
flow	50～70L	60～90L
Working pressure	0.18～0.20MPa	0.20～0.24MPa
pump speed	750r/min	810r/min
Suction	＞4m	＞4m
Noise	＜72dB	＜72dB
Minimum dry pump vacuum	0.054MPa	0.054MPa
Minimum wet pump vacuum	0.070MPa	0.070MPa
Motor working current	1.5～1.8 A	1.6～2.0 A

Working principles

 The oil pump is an internal meshing gear pump, secondary oil and gas separation is carried out in the shell, and a return oil floating system is installed in the atmospheric chamber. Outlet valve and overflow valve are also placed in the same shell, and the oil is filtered twice in the pump body. 
When the oil pump is working, it absorbs oil from the tank through the suction port and the filter. Under the action of pump pressure, the oil enters the flowmeter from the outlet after passing through the fine filter.Through the rotating centrifugation of the through-pipe and the oil and gas separation in the high-pressure chamber, the gas is discharged from the small hole at the through-pipe end and the oil and gas separation hole in the high-pressure chamber, and a small 
amount of oil accumulates in the atmospheric chamber. After the oil level exceeds a certain height, the return oil floats up, and part of the oil flows into the low-pressure chamber of the return oil pump.The working pressure (flow) of the oil pump can be adjusted by adjusting the spring pressure of the relief valve. 