The operating specifications of the hydrogen dispenser.

Hydrogen dispensers are used more and more, so some knowledge of hydrogen dispensers will be introduced in this article, I hope it will be helpful to you.

l The operating specifications of the hydrogen dispenser.

l The company's hydrogen dispenser products.

The operating specifications of the hydrogen dispenser.

1. The original start-up of the hydrogen dispenser:

(1) Preparation

1. Check whether all pipes and valves in the whole system are in good condition, and close all valves in the system.

2. Add clean water to the leak test tank to make the clean water overflow from the tank, ensure that there is no grease in the tank, and check the air tightness of the hydrogen tank.

(2) Pressure test and purge of hydrogen dispenser system

1. After the device is installed or overhauled, an air-tightness test should be carried out. The test pressure should be the highest working pressure of the device, the test gas should be dry nitrogen, and the pressure holding time should not be less than 2 hours.

2. Inject nitrogen into the busbar for pressure test and leak test to ensure that the pipeline has no obvious deformation, leakage or abnormal noise.

2. Normal start-up of the hydrogen dispenser

1. Inform the restoration before driving to check whether the system is in a normal parking state.

2. Check whether the busbar of the hydrogen dispenser gas station and the pressure gauge and valve of the hydrogen cylinder are in the correct opening and closing state, and whether the meter indication is correct.

3. Place the hydrogen tank at the designated position for fixation to prevent vibration and dumping.

3. Normal shutdown of the hydrogen dispenser

1. Before stopping, notify the restoration post to close the point-of-use valve.

2. Close the air outlet valve on the busbar.

3. Close the valve on the hydrogen tank.

The company's hydrogen dispenser products.

Jiangyin Furen High-Tech Co., Ltd. was established in 2001. As the top three company in China, our products are sold well in various provinces and cities across the country, and our products are also exported to Kenya, Thailand, Indonesia and other countries. We are the only designated partner of Sinopec. We have established a joint venture with Sanhe to introduce advanced Japanese technology.

Our main products include fuel dispensers, LNG/CNG gas dispensers, fuel tanks, car washers, vending machines, diesel generators, and charging piles. The gas distributors are mainly hydrogen dispensers and liquefied natural gas distributors. For example, 45MPA Working Pressure 99.999% Ultra Pure Hydrogen Gas Dispenser for Vehicle Refuelling, 350 Bar Self-help Hydrogen Transferring Dispenser for Logistic Car in Gas Station, Customized One-Stop Solution Refilling Hydrogen Tank Petro Filling Station with Pump And Strong Hydrogen Dispenser, etc. Type of hydrogen dispenser.

If you are interested in our company's products, you can make a consultation and purchase. We will provide you with the best hydrogen dispenser products and services. I hope you can purchase a suitable hydrogen dispenser. I wish you a happy and smooth work. Regarding what the hydrogen dispenser means, please contact us if you have any questions. We will always be on standby.