Publish Time: 2021-11-12 Origin: Site
Hydrogen dispensers are used more and more, so some knowledge of hydrogen dispenserswill be introduced in this article, I hope it will be helpful to you.
l Process flow of hydrogen dispenser.
l The company's hydrogen dispenser products.
The process flow of the hydrogen dispenser gas station is mainly composed of the following system configurations: unloading system, pressurizing system, hydrogen storage system, hydrogenation system, nitrogen system and emission system.
Hydrogen storage system: hydrogen dispenser gas station has two hydrogen compression and filling schemes: one is graded charging, which is the traditional pressure injection method. In order to make the pressure of the vehicle-mounted gas cylinder reach 35 MPa, the hydrogen dispenser gas station stores hydrogen The pressure of the tank needs to be as high as 40-45 MPa to get fast refilling. The other is pressurization and compression. At this time, the pressure of the hydrogen storage tank in the middle of the hydrogen dispenser gas station can be relatively low (for example, 25 MPa). After using this hydrogen to partially stamp the on-board hydrogen storage cylinder, start the booster compressor to make The vehicle-mounted hydrogen storage bottle reaches 35 MPa.
Nitrogen system: The fuel cell hydrogen refueling station dedicated to the Shanghai World Expo is equipped with a nitrogen cylinder group as the gas source of the gas control system and the purge gas for the pipes and equipment of the hydrogen dispenser gas station. The basic process of the nitrogen supply system is as follows: the high-pressure nitrogen from the nitrogen cylinder group is reduced to 0.7MPa after decompression, and then divided into two routes, one is supplied to the pneumatic actuator of each emergency shut-off valve as its control gas; the other is the gas The actuators of each pneumatic valve sent to the compressor start the opening and closing of the valve.
Jiangyin Furen High-Tech Co., Ltd. was established in 2001. As the top three company in China, our products are sold well in various provinces and cities across the country, and our products are also exported to Kenya, Thailand, Indonesia and other countries. We are the only designated partner of Sinopec. We have established a joint venture with Sanhe to introduce advanced Japanese technology.
Our main products include fuel dispensers, LNG/CNG gas dispensers, fuel tanks, car washers, vending machines, diesel generators, and charging piles. The gas distributors are mainly hydrogen dispensers and liquefied natural gas distributors. For example, 45MPA Working Pressure 99.999% Ultra Pure Hydrogen Gas Dispenser for Vehicle Refuelling, 350 Bar Self-help Hydrogen Transferring Dispenser for Logistic Car in Gas Station, Customized One-Stop Solution Refilling Hydrogen Tank Petro Filling Station with Pump And Strong Hydrogen Dispenser, etc. Type of hydrogen dispenser.
If you are interested in our company’s products, you can make a consultation and purchase. We will provide you with the best hydrogen dispenser products and services. I hope you can purchase a suitable hydrogen dispenser. I wish you a happy and smooth work. Regarding what the hydrogen dispenser means, please contact us if you have any questions. We will always be on standby.