Technical parameters of flow meter
|
| 1 | model Type | FM1(1)、FM1(2)、FM1(3)、FM1(4) |
| 2 | forms | Four-piston volumetric flowmeter (adjustable type) |
| 3 | Conditions of use of oil | A) Oil product name: gasoline, kerosene, diesel oil
B) Common pressure: 0.3Mpa
C) Viscosity: below 8 MPa · S
D) Additives: 10-15% ethanol |
| 4 | Environmental conditions | A) Temperature: -25 ~ 40℃
B) Humidity: 5 ~ 95% |
| 5 | Use flow range | 5～90L |
| 6 | compressive strength | 4 MPa |
| 7 | structure pressure (can restore the function of pressure
Force) | 2 MPa |
| 8 | emissions | 0.5L/flowmeter output shaft per revolution
Adjusting hole adjustment: about 0.1% / 2 holes |
| 9 | device differential accuracy | Plus or minus 0.2% |
| 10 | adjustment range of device difference | -0.6% -- + 1.0% (Adjuster poor beyond this range will result in a regulator
A damaged) |
| 11 | Pressure loss | 0.027 Mpa (40 l/min) |
| 12 | installation | Vertical installation (tilt less than 3°, the upper cover of the flowmeter shall be above
|
| 13 | Vibration resistance | JISZ200 standard III |
| 14 | Consuming parts | Oil seal, after disassembly, sealing parts, friction parts |
| 15 | Daily inspection/precautions
| A) Daily and regular spot inspection items: leakage, abnormal vibration, abnormal sound and poor device performance
B) Precautions: 1. Do not mix with water and foreign matter
2. It is recommended to install it at the front end of the oil inlet of the flow meter
Over 200 mesh strainers |
| 16 | Rotation direction of output shaft | Turn right (as seen from above the output shaft) |
English
